Description

This block is used to specify the interconnection information for the FPGA 64-to-64 Interconnect Controller block.

Mask Parameters

Available Signal Name list:This parameter is used to set the available signal names in the drop-down lists. It should be identical to the "SelectedSignals" parameter of the corresponding FPGA 64-to-64 Interconnect block in the firmware RT-XSG model.

Selected Signal Name List:This parameter is used to set the name of the subsequent drop-down selection titles.

SW01 signal selection from bus: Set the interconnection information by selecting a signal from this drop-down list.

Inputs

This block has no input.

Outputs

InterconnectCfg: This signal contains the interconnection information. It should be connected to the input of a "FPGA 64-to-64 Interconnect Controller" block.

Characteristics and limitations

This block has no special characteristics.

If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.