Documentation Home Page ◇ Cell Monitoring Device Emulation Add-On for NI VeriStand Home page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Development Machine
- Myriam Desranleau
This page provides a list of the required software and compatible versions to install on the development machine. For a step-by-step guide to installing the CMDE Add-On and its software dependencies to the development machine, see the Installation page.
Operating System Requirements
Operating System | Minimum Software Versions |
|---|---|
Windows 10 64-bit | All versions supported |
Windows 11 | VeriStand 2021 R3 |
National Instruments Software
The table below lists the National Instruments software dependencies for the CMDE Add-On for NI VeriStand. These dependencies are installed automatically as part of the CMDE Add-On Installation. It is not necessary to install them separately. In order to know which NI Linux RT Image is compatible with your NI VeriStand version, please refer to VeriStand and NI Linux Real-Time Base System Image Compatibility.
Software | NI License Required | Supported Versions |
|---|---|---|
NI VeriStand | Veristand Development System |
|
NI Linux RT Image | None | 21.5+ |
Software Installation on the Development Machine
See Installation for step-by-step installation instructions to install the CMDE Add-On and its dependencies on the development machine.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323