Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

FPGA-Based Simulation

HYPERSIM can not only run very large grids on standard PCs using Intel CPUs, it can also run circuits on an FPGA when the accuracy requirement is higher and a lower time step (>100 ns) needs to be achieved, such as for high frequency switching power electronic.  The CPU and FPGA models can then either be run separately or interfaced to achieve more complex simulations. In this hybrid simulation, various time steps can be used for the CPUs and each FPGA.

For information on the library component that needs to be added to the HYPERSIM model, see: FPGA-Based Circuit

For information on the dedicated schematic editor, see: OPAL-RT Schematic Editor User Documentation

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323