Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Installing HYPERSIM on a Target from Windows

Page Content



See also: HYPERSIM Target Manager.

This documentation explains the HYPERSIM target installation process.



Installing HYPERSIM Using the Target Manager

If a previous, compatible version is already installed on the target, HYPERSIM can be installed directly from its Windows interface.

Adding a Target

  • Under the HYPERSIM tab in the Tools section, click Target Manager.




  • Click + (Add Target).




  • Enter the IP address of your target. Add an intuitive description so that you may easily recognize your target.




When done, click Ok.

  • The user and password are required for the first installation, see below for the details.




If you have lost or misplaced your Target's credentials, please contact our Technical Support team and we'll be happy to assist you. Be sure to include your simulator's Operating System (e.g., OPAL-RTLinux 3)



  • The target is now displayed in the Targets panel along with identifying information.




The green mark indicates the target is reachable on the network (or was the last time the status was refreshed). Y
ou can update the information by clicking the Refresh all targets button.


Installing HYPERSIM

  • Click the Targets tree node, then the tree node associated to the target, then Versions.




  • You can click refresh to get information about the versions:
    • The version that runs locally
    • The version that currently runs on the target (highlighted in blue)
    • Installed versions on the target
    • The date of the last information refresh



  • Click the Install Version button to install the version on the target.




After the installation is completed, the Local running version and Target running version should match.

Installing HYPERSIM Manually Using Remote Access

Installing MobaXterm Client

  1. In the Windows Explorer address bar, type: \\TargetHostName\hyppub ...
    ...Where TargetHostName is the hostname/IP of the target.


Windows Explorer address bar

  • In another Windows Explorer navigate to the right linux folder for the rpm: C:\OPAL-RT\HYPERSIM\hypersim_YYYY.Q.P.oXXX\linux-<OS_VERSION>
  • Then copy the HYPERSIM® installer and the HYPERSIM® add-ons (v2) to this location. This information appears in the system integration document provided with the simulator, on the CD.
  • Download MobaXterm Home Edition from: http://mobaxterm.mobatek.net/download.html
    • This program is used to communicate and to exchange files between the host computer and the simulator.
    • The downloaded file is called MobaXterm_Setup_x.x.msi.
  • Start the installation from the MobaXterm_Setup_x.x.msi file.
  • Click Next on the Welcome page.


Installation Welcome page

  • Check the box to accept the terms of the license agreement, and click Next.


Accepting End-User License Agreement

  • Choose where you want to install MobaXterm on your Windows PC, then click Next.


Choosing destination folder

  • Click Install.


Starting and Configuring MobaXterm

  1. After the installation, click Finish. The installation wizard has automatically added a shortcut to your desktop.
  2. Open MobaXterm by double-clicking its icon from the desktop.


  1. Click Session to create a new session for user root. The Session window opens.


MobaXterm main page

  1. In the Session window, configure your session for the user root.




  1. Select SSH mode.
  2. Type the simulator’s IP address. (This information can be found either in the System Description document or on a label affixed to the simulator.)
  3. Check Specify username and input the username root.
  4. Open a session by double-clicking on the session’s name in the list on the left-hand side of MobaXterm.



Note: the first time you open a session, it will prompt for a password and give you the option to save it.

If you have lost or misplaced your Target's credentials, please contact our Technical Support team and we'll be happy to assist you. Be sure to include your simulator's Operating System (e.g., OPAL-RTLinux 3)



Installing HYPERSIM

For RedHat or CentOS Target

  • Enter the following commands:


rpm -ivh /mnt/hyppub/rpm/opal-hypersim_addons-sa-2-version.rpm
rpm -ivh /mnt/hyppub/rpm/opal-hypersim-target.rpm

Where opal-hypersim_addons-sa-2-version.rpm and opal-hypersim-target.rpm are the names of the add-ons and installer previously copied in \\TargetHostName\hyppub


Note: if HYPERSIM® is already installed on your target, enter the following command:

rpm -ivh --force /mnt/hyppub/rpm/opal-hypersim-target.rpm

  • Wait for the installation to finish.
  • Enter the following command:


service hy.core restart
service hy.core status

For OPAL-RTLinux Target

  • Enter the following commands:


rpm -ivh /mnt/hyppub/rpm/opal-hypersim-target.rpm

opal-hypersim-target.rpm is the name of the installer previously copied in  \\TargetHostName\hyppub


Note: if HYPERSIM® is already installed on your target, enter the following command:

rpm -ivh --force /mnt/hyppub/rpm/opal-hypersim-target.rpm

  • Wait for the installation to finish.
  • Enter the following command:


systemctl restart hycore
systemctl status hycore


  • Disconnect from the target by entering “exit” and close MobaXterm.

  • Return to the HYPERSIM Target Manager window to validate that the installation was correctly processed.

Installing Licenses on a Target

Once the target's HYPERSIM version matches the host's HYPERSIM version, update your licenses via the Target Manager.

  • Click the target's License tree item in the left navigation bar.
  • All license information is available in the first tab, and communications with the target are logged in the Log tab.




  1. First, the target's license information needs to be requested. Click the (info) Information button: Get target information and license file.
    1. Machine information is displayed in the first text area. This information is mandatory whenever a target license request is sent via https://www.opal-rt.com/contact-technical-support/
    2. If a license is already installed, its information populates the table.
  2. Once a license file is received from the support team (either in *.zip or *.bin format), simply load it and install it using the button below.


    1. Browse for your license file, or type its path in the text field highlighted above.

      The file should contain:
      1. A zip file containing an osbin file and/or a bin file
      2. An osbin file, which is the Operating System License
      3. bin file, which is the HYPERSIM license.

    2. Once the file is selected, click the arrow to request the installation.

      First, the osbin file is installed. Then, a license comparison tool appears. It compares the currently used license to the one you intend to install.

      Click Install to perform the installation.




    1. Once installation is finished, the target should be ready to perform simulation.
      If the license is incompatible with the target, an error message will appear.


Installing HYPERSIM on Windows Target

Since HYPERSIM 2021.3.0, multi-user mode is available on Windows targets in accelerated simulation (RTA) mode.

If you're interested in testing the feature and providing feedback, please contact the support team.


OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter