Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP8E05 Description
The OP8E05 module converts four (4) standard ±16V signal into a current source up to 100mA under 16V voltage compliance.
Features
4 channels
Maximum output current 100mA
Current and thermal protection
Board Layout
Channel Description
Each channel converts a standard ±16V voltage coming from a D/A converter of the simulator, into a current source up to 100mA under 16V voltage compliance.
The circuit includes current and thermal protection. Each channel is air-cooled by an optimized SMD heat sink.
The module requires an external power supply of ± 24V@ 0.5A, provided through an external connector, adapted for each Type-E-compatible carrier.
Pin Assignment
Refer to the OP8E00 Modules Pin Assignment table.
Note: Two or more current outputs can be merged at the DB37 output of the carrier on which the module is installed, in order to achieve a higher current range (for example, 2 x 100mA, or 4 x 100mA).
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323