Product model	OP5705XG
Product name	FPGA Based Real-Time Digital Simulator
CPU	2nd Generation Intel® Xeon® Scalable Processors Available with the following configuration: 4 Cores - Intel® Xeon® 2.6 GHz 4 Cores - Intel® Xeon® 3.8 GHz 8 Cores - Intel® Xeon® 3.8 GHz 16 Cores - Intel® Xeon® 3.3 GHz
FPGA	Xilinx® Artix®-7 FPGA, 200T
I/O lines	256 lines, routed to 8 analog or digital, 16 or 32 channels, conditioning modules
High-speed communication ports	4 SFP sockets, up to 5 GBps
Network Controllers	Dual LAN with 1GbE 88E1512
I/O connectors	4 panels of 4 DB37F connectors
Monitoring connectors	4 panels of RJ45 connectors
PC interfaces	Standard PC connectors (VGA, USB and network)
PCIe slots	6 onboard PCIe slots. 4 or 5 of these slots are available for third-party cards or riser boards, depending on CPU configuration.
Hard disk	500 GB SSD
Memory	32 GB DRAM
Power supply	Input voltage: 115 VAC +/-15V, 220 VAC +/- 30V Input frequency: 50-60 Hz Input current: 8 A (115 VAC) -4 A (220 VAC) Power: 600 W
Dimensions (RU, WxHxD)	5U rack unit, 47.7 x 22.4 x x 49.3 cm (18.8” x 8.75’’ x 19.4”)
Weight	17 kg (37.5 lbs)

Environmental

Intended use	For indoor use only
Ventilation requirements	Do not block vents on the unit. Allow sufficient ventilation space around the unit (recommended 6” at sides and rear) when not mounted in a standard rack.
Operating temperature	10 to 35º C (50 to 95º F)
Relative humidity	10 to 90 % non-condensing
Maximum altitude	2000 m (6562 ft.)
Pollution	Degree 2

Hardware Products Documentation