/
Install TI add-ons and Set Up Hardware in MATLAB

Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Install TI add-ons and Set Up Hardware in MATLAB

  • Open MATLAB.
  • Before you begin, make sure you have Embedded Coder and Simulink Coder toolboxes installed in MATLAB.
    This will be used to generate the code for the TI controller. 
  • To check, type ver in command window.

  • You will need to use a free MATLAB account.
    • If you don't have one, create a free MATLAB account at mathworks.com.
  • In MATLAB, log in to your account in the top right corner of MATLAB.

  • In the MATLAB menu, click on Add-ons > Get Add-ons.

  • Search for Texas Instruments C2000 Package and install it.

  • Configure C2000 Add-ons package by going to Add-ons > Manage Add-ons.

  • Click on the cog next to C2000 package.

  • Double-click on Select All to deselect all.
  • Select TI Delfino F2837xD.
  • Click Next.

  • Keep the default installation folder or choose another folder and click Next.

  • Keep the default installation folder or choose another folder and click Validate, then click Next.

  • Click Next.

  • Verify that all is correct and click Next.

  • Click Finish.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter