General

Product Name	OP8910

Product Name	OP8910
Part Numbers	see OP8910 configurations options
Board Type	Digital input/output conditioning
Form Factor	SLSC
SLSC Module Design Specifications	Version 1.2.1
SLSC Compliance Level	1
Rear I/O Compatibility	[01] (Digital Input/Output up to 32 channels)
Hot-Plug support	No

Characteristics

Number of channels	32 input or output channels Number of input /outputs depend on assembly selected. See OP8910 configurations options
Max peak current with FIU	1A, see OP8900 SLSC Boards - FIU Description
Digital Inputs
Voltage Range	0-45V with programmable high/low threshold on the whole voltage range, per group of 8
Protection	±100VDC and ±100VAC
Input Impedance	> 100kOhms
Digital Outputs
Type	Single-ended outputs
Voltage Range	3.3V or 5.0V (LVTTL, TTL)
Protection	Short Circuit Protection Protection limit: ±50VDC and ±50VAC, for single or multiple faults
Current limit	32mA/ch, 800 mA total
Output impedance	25 Ohms

Maximum Frequency	>100Mb/s
Latency	<20ns
Timing Resolution	12.5ns (for FPGA at 80MHz), 10ns (for FPGA at 100MHz)

The OP8910 is designed for indoor use only.

Module operating temperature	0 °C to 85 °C
Storage temperature	-40 °C to 85 °C
Operating humidity	10% to 90% non-condensing
Storage humidity	5% to 95% non-condensing
Pollution Degree	2
Maximum altitude	2,000 m
Power requirement	12W