/
HIL2GO-410 - System Power On and Power Off Sequences

Documentation Home Page ◇ HIL2GO Main Menu
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

HIL2GO-410 - System Power On and Power Off Sequences

Owned by Sylvain Ménard
Sept 19, 2024
1 min read

Page Content

TARGET COMPUTER RE-BOOT WARNING: Follow the Power On/Off sequence as indicated below. Failure to do so may require rebooting of the Target.

image-20240729-160137.png
Power on and power off sequences

Power on Sequence

  1. Power on the OP4810-IO

  2. Power on the OP5025XG

If the OP525XG (which is running HYPERSIM on the target) is powered on before the OP4810-IO, HYPERSIM won't be able to detect the present of OP4810-IO FPGA Processor and I/O Expansion Units.

Power off Sequence

  1. Power off the OP5025XG

  2. Power off the OP4810-IO

Disconnecting or powering off the OP4810-IO during operation will require a power off sequence followed by a power on sequence in order to resume reliable operation.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter