Documentation Home Page ◇ HIL2GO Main Menu
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

HIL2GO-410 - Activate your Target HYPERSIM License

Owned by Sylvain Ménard
Last updated: Sept 20, 2024
1 min read

On your system, there is a temporary license. Please, activate your lifetime license for HYPERSIM on your target as soon as possible.

Even, if you already requested your HYPERSIM license for the HYPERSIM instance installed on your Windows PC (the host or localhost), you need to request and install a license for HYPERSIM on your target.
All lifetime licenses are part of your HIL2GO-410 bundles.

Activating your HYPERSIM license requires only few simple steps described in this knowledge base article, under the “Target (simulator)” section : HYPERSIM : How to Request a License on Localhost and Target (Simulator) in 2023.1.x+.

The main steps are

  • Add the target in HYPERSIM on your host Windows PC

  • Request a license for HYPERSIM located on your target

  • Install the HYPERSIM target license

  • The target is the OP5025XG simulator.

  • The default IP address in written on a label located in the front panel of the target (the OP5025XG). If you, or your IT department, changed the IP address, enter your IP address.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter