Documentation Home Page ◇ Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
3.10 Controlling and Monitoring the Simulation
- Sylvain Ménard
- Pierre-Luc Renault (Unlicensed)
- Myriam Desranleau
Manipulate the Speed Setpoint and Load Torque parameters and observe the resulting voltage and current waveforms as the machine runs.
Due to its configured parameters, the PMSM machine in this example has a nominal speed between 2000 and 3000 RPM. The system can become unstable if the speed surpasses 3000 RPM, or if the Ramp Rate or Load Torque are too high.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter