/
Single Phase inductive de-coupling

Documentation Home Page ◇ OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Single Phase inductive de-coupling

EHS SOLVER HSCS SOLVER

This block decouples the circuit into two sub-circuits, providing a interface between them equivalent to a series inductor.

image-20240813-202322.png

eHS - eHS Decoupling model

EHS SOLVER

eHS - HSCS Decoupling model

HSCS SOLVER

Parameters

EHS SOLVER

image-20240813-202340.png

HSCS SOLVER

image-20260504-185139.png

 

 

 

Parameters

Parameters

De-coupling inductance value (H)

Equivalent series inductance value

Initial current (I0)

Specifies the initial current flowing through the inductor at the beginning of the simulation. This value defines the inductor’s stored energy at t=0 and is used as the initial condition for the component’s equivalent circuit.

Positive current is defined according to the inductor current reference direction used in the model. A value of 0 means the inductor starts with no stored magnetic energy.