Documentation Home Page ◇ OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
DC Current Source
This block implements a constant DC current source.
This block represents an ideal current source that outputs a constant DC current regardless of the voltage flowing through the block. Constant current can be positive or negative. It is described by the following equation
Iout = I0
Parameters
| DC current I0 [A] | Amplitude of the DC signal expressed in amperes |
|---|
Electrical ports
- From top to bottom, the electrical ports are the positive and negative ports of the source respectively named p1 and n1
Characteristics
All the parameters of this block can be set to have their values come from a Simulink block inport in the deep panel view
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323