Documentation Home Page ◇ OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
AC Voltage Source
This block implements a sinusoidal AC voltage source.
This block represents an ideal AC voltage source that outputs a constant sinusoidal voltage regardless of the current flowing through the block. It is described by the following equation:
Vout = A * sin ( f * 2π * t + Φ * π/180 ) + V0
Vout represents the voltage that is applied across the block (referenced to the - port).
Parameters
Voltage amplitude A [V] | The peak amplitude referred to the DC voltage offset of the signal expressed in volts |
|---|---|
| Frequency f [Hz] | Frequency of the signal expressed in hertz |
| Phase Φ [°] | The phase shift of the signal at t = 0 expressed in degrees |
| DC voltage offset V0 [V] | The amplitude offset or bias of the signal expressed in volts |
Electrical Ports
- From top to bottom, the electrical ports are the positive and negative ports of the source respectively named p1 and n1
Characteristics
All the parameters of this block can be set to have their values come from a Simulink or HYPERSIM block inport by using the deep panel view
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323