Documentation Home Page ◇ OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Resistor
This block implements a resistor.
A resistor is a passive two-terminal electrical component that implements a linear resistance. It is described by the following equation:
Vr = R * Ir,
where Vr is the voltage at the resistor terminal and Ir is the current flowing through the resistor.
Parameters
Resistance R [Ω] | Resistance, in ohms. |
|---|
Electrical Ports
- From top to bottom, the electrical ports are the positive and negative ports of the source respectively named p1 and n1
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323