Documentation Home Page ◇ TestDrive Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
TestDrive | Module Configuration Tools
- Sylvain Ménard
Base Module Configuration Dialog Box
The Base Module Configuration dialog box is used to configure the moded power outputs of the selected Base module. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Rail Enable Active State Radio Buttons
The Rail Enable Active State radio buttons allow users to set the rail to enable the active state to high or low.
Termination Group
Termination Switches
Termination buttons allow users to switch CAN termination resistor states on and off.
Power Rails Group
Bit Setting Checkboxes
Each column of Bit checkboxes is associated with a power rail. Each row represents the bit setting of a mode. When a checkbox is checked, the bit is set to 1, activating the related power rail of the associated mode.
Rail Enable Designator Checkboxes
Each of the Rail Enable Designator checkboxes is associated with a power rail. When a checkbox is checked, it designates a rail, i.e., it allows the associated rail to be enabled when a mode is selected.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Switch Module Configuration Dialog Box
The Switch Module Configuration dialog box allows the user to set the switches configuration and the power rail. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Discrete Group
Configuration Option Buttons
Each of these option buttons allows the user to select the associated discrete switch configuration.
Power Rail Option Button
This option button allows the user to select to which of the rail's power source the discrete switches short a signal to.
Flexible Group
Configuration Option Buttons
Each of these option buttons allows the user to select the associated flexible switch configuration.
Power Rail Option Buttons
Each of these option buttons allows the user to select to which of the rail's power source the associated flexible switch shorts a signal.
Rotary Group
Configuration Option Buttons
Each of these option buttons allows the user to select the associated rotary switch configuration.
Power Rail Option Button
This option button allows the user to select which of the rail's power source the rotary switches short a signal to.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Reference Pulse Generator Module Configuration Dialog Box
The Reference Pulse Generator Module Configuration dialog box allows users to change the RPG module's outputs. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Pattern File Option Button
Allows the user to select the pattern file.
Refresh Button
Requests TestDrive to perform an update of the pattern file list.
TDC Display Field
Shows the output type for the TDC output.
User RefPulse Group
Type Option Buttons
Allow the user to select the output type for the user reference pulse outputs.
Cam Phaser Group
Type Option Buttons
Allow the user to select the output type for the cam phaser outputs.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Pulsed Output Module Configuration Dialog Box
The Pulsed Output Module Configuration dialog box allows users to change the module's pulsed outputs. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Type Option Buttons
Allow the user to select the output type for the pulsed outputs.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Pulse Driven Load Module Configuration Dialog Box
The Pulse Driven Load Module Configuration dialog box allows users to change the module's pulse-driven load inputs. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Standard PDL Inputs
Bias Resistor Display Fields
These display fields allow the user to view each standard PDL input's bias resistor value.
Power Rail Display Fields
Each of these display fields allows the user to view to which of the rail's power source the associated standard PDL input shorts a signal.
Bipolar PDL Inputs
Bias Display Fields
This display field allows the user to view the bias value of bipolar PDL inputs.
Power Rail Option Buttons
Each of these option buttons allows the user to select to which of the rail's power source the associated bipolar PDL input shorts a signal.
Flexible PDL Inputs
Bias Resistor Display Fields
These display fields allow the user to view each flexible PDL input's bias resistor value.
Power Rail Option Buttons
Each of these option buttons allows the user to select to which of the rail's power source the associated flexible PDL input shorts a signal.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Resistive Sensor Module Configuration Dialog Box
The Resistive Sensor Module Configuration dialog box allows users to change the module's resistive sensor inputs. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Termination Option Buttons
These buttons allow the user to choose the resistive sensor input's termination voltage.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
Analog Sensor Module Configuration Dialog Box
The Analog Sensor Module Configuration dialog box allows users to enable/disable the linearization tables on two groups of channels. For more information on how to use this dialog box see the Configuring the Modules section of the System Administrator Guide.
Linearization Switches
These buttons allow the user to enable/disable the linearization tables on channels 12-13 and 14-15.
General
Apply Button
Applies the current configuration without closing the dialog box.
OK Button
Applies and saves the current configuration, then closes the dialog box.
Cancel Button
Closes the dialog box without saving or applying the changes.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter