Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP8926 Pin Assignment
- Sylvain Ménard
Page Content
Before designing cables, OPAL-RT recommends using these guidelines: Simulator EMC cable recommendations.
J1/J2 HDB44 Connector Pinout
As explained in OP8910 Hardware Interface, both HDB44 connectors J1 and J2 share the same pin-out.
The 32 digital I/O signals are routed to both J1 and J2 connectors. This allows, for example, splitting the input and output signals into two different cables.
OP8926 Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Signal Name | D0 | D2 | D4 | GND | D8 | D10 | D12 | VUser1 | D16 | D18 | D20 | GND | D24 | D26 | D28 |
 | |||||||||||||||
Pin | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
Signal Name | D1 | D3 | D5 | GND | D9 | D11 | D13 | VUser2 | D17 | D19 | D21 | GND | D25 | D27 | D29 |
| |||||||||||||||
Pin | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 |
|
Signal Name | D7 | D6 | GND | GND | D15 | D14 | GND | GND | D23 | D22 | GND | GND | D31 | D30 |
|
For more information about the use of Vuser and Vrtn pleaser refer to this article in the OPAL-RT knowledge base : How to power the different DB37 boards for digital outputs.
The direction of the signals D0 to D31 depend on the OP8926 assembly:
Part Number | Description | Digital In | Digital Out |
|---|---|---|---|
OP8926 | 32-Channel Digital IO SLSC Conditioning Board | D0-D31* | D0-D31* |
* Software selectable per bank of 8 channel
J3 Connector Pinout
GND | GND |
VBus_A | VBus_B |
XJ2 Connector Pinout
XJ2 Signal | OP8926 | XJ2 Pin | XJ2 Signal | OP8926 | XJ2 Pin | |
|---|---|---|---|---|---|---|
P0.0 | D0 | a1 | P2.0 | D16 | a7 | |
P0.1 | D1 | b1 | P2.1 | D17 | b7 | |
P0.2 | D2 | d1 | P2.2 | D18 | d7 | |
P0.3 | D3 | e1 | P2.3 | D19 | e7 | |
P0.4 | D4 | a2 | P2.4 | D20 | a8 | |
P0.5 | D5 | b2 | P2.5 | D21 | b8 | |
P0.6 | D6 | d2 | P2.6 | D22 | d8 | |
P0.7 | D7 | e2 | P2.7 | D23 | e8 | |
GND | GND | a3 | GND | GND | a9 | |
GND | GND | b3 | GND | GND | b9 | |
GND | GND | c3 | GND | GND | c9 | |
GND | GND | d3 | GND | GND | d9 | |
GND | GND | e3 | GND | GND | e9 | |
P1.0 | D8 | a4 | P3.0 | D24 | a10 | |
P1.1 | D9 | b4 | P3.1 | D25 | b10 | |
P1.2 | D10 | d4 | P3.2 | D26 | d10 | |
P1.3 | D11 | e4 | P3.3 | D27 | e10 | |
P1.4 | D12 | a5 | P3.4 | D28 | a11 | |
P1.5 | D13 | b5 | P3.5 | D29 | b11 | |
P1.6 | D14 | d5 | P3.6 | D30 | d11 | |
P1.7 | D15 | e5 | P3.7 | D31 | e11 | |
GND | GND | a6 | GND | GND | a20 | |
GND | GND | b6 | GND | GND | b20 | |
GND | GND | c6 | GND | GND | c20 | |
GND | GND | d6 | GND | GND | d20 | |
GND | GND | e6 | GND | GND | e20 | |
GND | GND | a17 | GND | GND | a23 | |
GND | GND | b17 | GND | GND | b23 | |
GND | GND | c17 | GND | GND | c23 | |
GND | GND | d17 | GND | GND | d23 | |
GND | GND | e17 | GND | GND | e23 |
XJ3 Connector Pinout
XJ3 pin | OP8926 | ||
|---|---|---|---|
H | VBus_A | ||
G | GND | ||
F | VBus_B | ||
E | GND | ||
D | VUser_1 | ||
C | GND | ||
B | VUser_2 | ||
A | GND |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter