Monitoring Signals Directly in the Schematic

Let's start with the HVAC_500kV_6Bus example model. We will add 3 Monitors and configure them to display the RMS voltage of phase A of bus WES0 and WES7 as well as the RMS current of phase A going through Di1 circuit breaker.

Here are the settings for each Monitor:

Monitoring can be started directly from the ribbon:

IMPORTANT NOTE: This functionality triggers periodical micro-acquisitions for a duration of 0.033 second (2 cycles at 60 Hz) every 0.5 second. Depending on the number of acquired signals, its usage may impact real-time performance.