Documentation Home Page ◇ Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
(Archived) eHSx128_Dual_PMSM_VDQ_IO_7976R
- Sylvain Ménard
- Pierre-Luc Renault (Unlicensed)
This Hardware Configuration has been archived and should not be used in new projects. Please contact OPAL-RT Support for more information.
Specifications
IO Capabilities
This configuration requires the following FPGA boards and adapter modules. Please refer to the linked product page for additional information.
Quantity | FPGA Board | FlexRIO Adapter Module |
|---|---|---|
1 | - | |
1 | ||
1 |
PXIe-7976R
Setup
In this configuration, the NI PXIe-7976R is used with the NI 6581B FlexRIO Adapter Module. Please refer to NI 6581B product page for additional information.
IO Type | Details |
|---|---|
Digital Input | 54 CH, 100MHz, 3.3V TTL (Connector 0 and 1) |
Refer to 7976R+6581B IO Assignation [eHSx128_Dual_PMSM_VDQ_IO_7976R] to see the IO assignment.
Modeling Capabilities
This configuration includes a pre-compiled firmware/bitfile which contains the following features:
Features | Additional Information |
|---|---|
1x eHSx128 Solver | User-defined mapping to Circuit Sources available:
User-defined mapping to Circuit Switches available:
|
2x PMSM Variable Parameter Solver | Each machine supports two modes: Constant Parameter and Variable Parameter. In constant parameter mode, Ld, Lq, and flux is constant. In variable parameter mode, a user can configure the solver to such that Ld, Lq, and flux varies according to Id and Iq. Refer to the PMSM BLDC Section for more information. |
PXIe-7971R
Setup
In this configuration, the NI PXIe-7971R is used with the NI 5742R FlexRIO Adapter Module. Please refer to NI 5742R product page for additional information.
IO Type | Details |
|---|---|
Analog Output | 32 CH, 1MS\s, 16-bit User-defined mapping to Analog Outputs available with tunable Gain, Offset, and Min/Max Saturation.
|
Refer to 7971R+5742R IO Assignation [eHSx128_Dual_PMSM_VDQ_IO_7976R] to see the IO assignment.
Modeling Capabilities
This configuration includes a pre-compiled firmware/bitfile which contains the following features:
Features | Additional Information |
|---|---|
32x Sinewave Generators |
|
16x PWM Generators |
|
12x Sinusoidal PWM Generators |
|
Analog Output Mapping and Rescaling |
|
32x Waveform Acquisition Channels |
|
PXIe-7868R
IO Type | Details |
|---|---|
Analog Input | 6 CH, 1MS\s, 16-bit, +/- 10V Input Signal Range, Differential Tunable Gain, Offset, and Min/Max Saturation |
Analog Output | 18 CH, 1MS\s, 16-bit User-defined mapping to Analog Outputs available with tunable Gain, Offset, and Min/Max Saturation.
|
Digital Input | 32 CH, 80MHz, 3.3V TTL (Connector 1) |
Digital Output | 16, 10MHz, 3.3V TTL (Connector 0) User-defined mapping to Digital Outputs available with tunable Polarity.
|
Refer to 7868 IO Assignation [eHSx128_Dual_PMSM_VDQ_IO_7976R] to see the IO assignment.
Modeling Capabilities
This configuration includes a pre-compiled firmware/bitfile which contains the following features:
Features | Additional Information |
|---|---|
1x Resolver/motor | PMSM 1 excitation signal is connected to AI0 PMSM 2 excitation signal is connected to AI1 |
1x Encoder/motor | Assignable to any DO port |
1x Hall Effect Sensor/motor | Assignable to any DO port |
Analog Output Mapping and Rescaling |
|
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter