Complete List of Changes in ARTEMiS 7.7.5

• Compatibility with RT-LAB 2023.3

• Improved offline simulation performance

• Upgraded Wideband and Marti-FD line/cable gen-2 models

• Removed obsolete models:

  • Artemis_HVDC_VSC_TSBhiZ

  • OpenPhase_SPS_PMSM_allModesR2011B

  • OpenPhase_SSN_PMSM_allModesR2011B

  • ThreeLevelInverter_IVIC_RTE2

  • adgrid03_SVC_ssn_scantest

  • art_power_transfosat

  • art_power_xfosaturable

  • artemis_ITVC_ExtinctionZeroCrossing

  • artemis_ITVC_ExtinctionZeroCrossingSSN

  • artemis_OLTCregtransformer_stublines

  • ssn_triphaseline

  • SSN_Dual_IM_DFIMturnratioR2015a

  • TSBRD_2level_IO

  • ssn_WB2_3phase

• Fixed failing models:

  • AD_DRIVE06_hiZ_TSB_STUBLINE

  • ssn_Kundur

  • ssn_Kundur_rtlab

  • ssn_basic_matrix_converter

  • ssn_matrix_converter

  • ssn_48pulse_STATCOM

  • ssn_48pulse_STATCOM_AE

  • ssn_48pulse_STATCOM_multirate

  • ssn_IEEE_37node_withPMU

  • JMAG_reference_SH_JMAG028

  • SSNArtRectifier_ParallelDrive_4b_3LNPC

  • SSNArtInverter_3LevelNPC

• Removed obsolete blocks:

  • Asynchronous machine model with turn ratio (now standard in Simscape SimPowerSystems)

  • Three-Phase Fault block was superseded by the opElectricFault block of ARTEMiS

  • Switched core transformers models (now superseed by SSN OLTC models)

  • Simple Switched-segment MOV (now replaced by SSN iMOV model)

• Added blocks inGrid Forming Control Library

  • Reference Generation Three Phase

  • Inner Control Loop Three Phase

  • Primary Control Loop

  • Secondary Controller Three Phase

  • Signal Conditioning Three Phase

• Added example model

  • Distance protection relay

  • 505167 directional overcurrent protection relays

  • 87T protection relay

Complete List of Changes in ARTEMiS 7.7.4

• Compatibility with RT-LAB 2023.2

New Features

• Added Microgrid Simulink Library (microGridTestbedLibrary) with all the typical Distributed Energy Resources (DER’s) and control functions present in microgrids.
  
  

  • The following list shows the components of the library:

    • Active Power Controller

    • Reactive Power Controller

    • Curtailment Power Controller

    • Load Management Controller

    • Battery Energy Storage System

    • Islanded Controller

    • Diesel Generator System

    • BESS Power Reference Compensation

    • Wind Turbine System

    • Photovoltaic System

• Added support for MATLAB version R2022b and R2023a

• Added a Voltage-Behind Reactance Synchronous Machine (VBR-SM) simulink block example

Enhancements & Bug Fixes

• Smart Inverter Library : fixed bug in Secondary control block 

• Improved license check and license error messages 

• Fixed marti_line and wideband lines for OPAL-RTLinux 

• Fixed a compatibility issue during compilation of some TSB models 

• Corrected the Voltage-Behind Reactance Synchronous Machine (VBR-SM) simulink block documentation

• SSN code optimized to run offline correctly, with speed gain in line with theoretical expectations

• Fixed SPS phasor simulation mode running with ARTEMiS installed

Deprecation and Removals

• Matlab/Simulink R2018A, R2019A, R2019B : end of support

Complete List of Changes in ARTEMiS 7.7.3

• Compatibility with RT-LAB 2023.1

New Features

• New Smart Inverter Control Simulink Toolbox (IEEE Std. 1547‐2018) to perform Rapid Control Prototyping (RCP) of smart inverter controllers 

• New SSN Nodal Inverter models. These blocks replace IVIC inverter blocks. Demos upgraded.
  
  

• New ARTEMiS Variable PQ Load with Remote Calculation blocks. Improves the speed of large distribution grid demo by a factor 2 and more.

• Added support for MATLAB version R2022a

Enhancements & Bug Fixes

• Better performance on the new OPAL-RT hardware platforms ((Intel Xeon Scalable Processor based) by using vector processor instructions (AVX).

• Upgraded Switched Reluctance Motor model.

• 2-level TSB model compilation error (blob error) now fixed.

• Updated version of ssn_TrainTractionDrive example model (fixed compilation error) and AD_DRIVE06 example models

• Fixed simulation resetting automatically when enabling SSN

Known issues

• FD-line (Marti-type) 2nd generation model does not compile correctly (Ref. SOLVTT-451). 

Deprecation and Removals

• Matlab/Simulink R2015B, R2016A, R2016B, R2017A, R2017B : end of support

Complete List of Changes in ARTEMiS 7.7.2

• Compatibility with RT-LAB 2022.1

New Features

• New SSN Spatial-Harmonic-PMSM model compatible with JMAG and Maxwell data formats. The model is snubber-free.
  
  

• New SSN  '1-port' (grounded) or '2-port' Parallel-RLC and Series-RLC blocks. Port number are user selectable. SSN RLC blocks allow for on-line parameter modifications.

• New Smart Inverter library (beta)

• Steady-state initialization in SSN for source and linear parts.

Enhancements & Bug Fixes

• SSN-OLTC (v3) had a bug in code generation only. Fixed.

Complete List of Changes in ARTEMiS 7.7.1

• Compatibility with RT-LAB 2021.3

New Features

• New 5-level Neutral Point Clamped TSB-RD model and demo.

• New Virtual Educational Laboratory demo page. Included laboratories: synchronous machine and induction machine.

• New Machine models with constant admittance matrix. Can accelerate simulation by allowing prefactorization of the SSN admittance matrix.

Enhancements & Bug Fixes

• All SSN custom models (Machines, RLC, etc...) are now fully linked to the library and runnable in this mode.

• All SSN synchronous machine model optimization on the inductance inverse, now made separately in the d and q axes.

• ArtEvents TSDOUT bug resolved: ports numbers were not in order (beta).

Complete List of Changes in ARTEMiS 7.7.0

• Compatibility with RT-LAB 2021.2

New Features

• Support of MATLAB versions R2020a and R2020b.

Enhancements & Bug Fixes

• Correction to the SSN-PMSM motor model: works correctly now with the delayed speed term option.

• Correction to the Banshee demo: added missing files required for execution in Simulink.

• Correction to the standard SPS IGBT model: now works correctly in ARTEMiS.

• ArtEvents PWM block now includes a phase shift option on the duty cycle for application with cascaded inverters with phase shifted carriers. (Beta)

• New demo with 5-level NPC inverter using TSB-RD. Model name: TSB_RD_5levelNPC_Drive.slx (Beta)

• Introductory Help page for the Opal-RT Machine Courseware.

• Multirate stubline parameter modification for easier parametrization.

• SSN-OLTC transformer parameter modification for easier parametrization.