Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Common Keyboard Shortcuts
The following table lists key combinations used in the schematic drawing and symbol editor windows. The "+" or "-" character appearing between keys is to indicate that the keys must be pressed simultaneously.
| Command | Schematic | Symbol Editor |
|---|---|---|
Add pins | -- | CTRL + E |
Auto-create symbol | -- | CTRL + J |
| Bring to front | -- | CTRL + B |
| Close | CTRL + W | CTRL + W |
| Copy | CTRL + C | CTRL + C |
| Create sub-circuit block | CTRL + Shift + Q | -- |
| Cut | CTRL + X | CTRL + X |
| Design attributes | CTRL + Shift + D | -- |
| Draw bundle | CTRL + Shift + B | -- |
| Draw general signal | CTRL + Alt + Space | |
| Draw diagonal signal | CTRL + Alt + D | |
| Draw 3-phase bus | CTRL + Alt + 3 | |
| Draw phase A | CTRL + Alt + A | |
| Draw phase B | CTRL + Alt + B | |
| Draw phase C | CTRL + Alt + C | |
| Draw signal | CTRL + Shift + S | -- |
| Duplicate | CTRL + D | CTRL + D |
| Enlarge | CTRL + Shift + E | CTRL + Shift + E |
| Export | F2 | -- |
| Find | CTRL + F | -- |
| Go to selected | CTRL + G | -- |
| Properties | CTRL + I | -- |
| Group | -- | CTRL + G |
| Magnify | CTRL + Shift + M | -- |
| Move to grid | -- | CTRL + Shift + G |
| New | CTRL + N | CTRL + N |
| New breakout | CTRL + B | -- |
| Normal size | CTRL + Shift + N | CTRL + Shift + N |
| Normal size | Home | -- |
| Open | CTRL + O | CTRL + O |
| Open/close breaker | Alt + click | -- |
| Orientation for device | CTRL + Q | -- |
| Part attributes | -- | CTRL + I |
| Paste | CTRL + V | CTRL + V |
| Paste special | CTRL + Shift + V | -- |
| Pop up to parent circuit | CTRL + Shift + U | -- |
| CTRL + P | -- | |
| Push info sub-circuit | CTRL + Shift + I | -- |
| Redo | CTRL + Shift + Z | -- |
| Redraw | End | -- |
| Reduce | CTRL + Shift + R | CTRL + Shift + R |
| Reduce to fit | CTRL + Shift + F | CTRL + Shift + F |
| Reduce to fit | CTRL + Home | -- |
| Rotate left | CTRL + R | -- |
| Rotate right | CTRL + Alt + R | -- |
| Save | CTRL + S | CTRL + S |
| Save as | CTRL + Shift + A | -- |
| Select all | CTRL + A | CTRL + A |
| Send to back | -- | CTRL + Shift + B |
| Sub-circuit and part type | -- | CTRL + Q |
| Undo | CTRL + Z | CTRL + Z |
| Text font | -- | CTRL + T |
| Ungroup | -- | CTRL + U |
| Zap | CTRL + H | -- |
| Zoom in/out | CTRL + Mouse wheel | -- |
Other Key Usage
| Key | Function |
|---|---|
| Delete | Deletes selected items |
| Arrow keys | Flip and rotate items while placing a device or pasting |
| Arrow keys | Move selected items in small increments |
| CTRL or Shift or Alt | Path controls over signal lines while drawing signals. Press these keys after starting to draw with the mouse pointer. |
| CTRL + Shift | Control device alignment while placing devices. Press these keys while a device is stuck to the mouse pointer. |
| CTRL + Tab | To move between design windows in the main HYPERSIM window. |
| Page Up (PgUp) | Scroll up |
| CTRL + Page Up | Scroll left |
| Page Down (PgDn) | Scroll down |
| CTRL + Page Down | Scroll right |
| Spacebar or ESC | Exits and moves back to the normal pointer when a signal pointer is active. Also stops the sticky action of placed or duplicated objects. If you are working with the text tool pointer, then you must first exit the text then click the space bar. To exit the text, click on a blank space in the design. |
| If you hold down the CTRL button while holding down and moving the mouse pointer, you get a quick way for navigating around a drawing. | |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323