Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Multi-Mass Shafts | Programmable Parameters
- ar_tg0: Torque representing mechanical losses
- ar_nbmasse: Number of masses on a shaft, 1 to 5
- ar_h1, ar_h2,...: Inertia (in seconds) of masses based on the generator BaseMVA
- ar_d1, ar_d2,...: Damping factors of masses based on the turbine BaseMW (in pu torque/pu speed)
- ar_k12, ar_k23,...: Rigidity factors between masses based on the turbine BaseMW for a 3600 rpm machine (in pu/rad)
- ar_d1Start: Value of ar_d1 at starting
- ar_tStart: Time (in seconds) during which ar_d1 = ar_d1Start
- Mass_Tmec1: Mass to which torque Tmec1 is applied
- Mass_Tmec2: Mass to which torque Tmec2 is applied (Secondary shaft)
- Mass_Tmec3: Mass to which torque Tmec3 is applied
- Mass_Tmec4: Mass to which torque Tmec4 is applied (Secondary shaft)
- Mass_Tmec5: Mass to which torque Tmec5 is applied
- Mass_Tmec6: Mass to which torque Tmec6 is applied (Secondary shaft)
- Mass_Tmec7: Mass to which torque Tmec7 is applied
- Mass_Tmec8: Mass to which torque Tmec8 is applied (Secondary shaft).
Cross-compound thermal turbine generator control panel
Cross-compound thermal turbine generator control panel (generators)
Cross-compound thermal turbine generator control panel (turbine-speed-boiler)
Cross-compound thermal turbine generator control panel (mechanical torque-shaft)
Cross-compound thermal turbine generator control panel (excitation-stabilizer)
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323