/
Benchmarks | Two Substations with 100 km Transmission Line

Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Benchmarks | Two Substations with 100 km Transmission Line


Model name

Two substations with 100 km transmission line

Highlights

  • Highly detailed substation representation
    • A one-and-a-half breaker type substation
    • A double breaker type substation
    • 8 sources and 9 radial feeders
    • 25 possible fault locations

Capable of handling a high number of closely located switches per task

Model diagram


Single-phase nodes

129

Sources (3φ)

8

Transformers (3φ)

3

Single-circuit lines (3φ, Bergeron model)

1 (with embedded fault breaker)

Breakers (3φ) and faults (4φ)

56 + 25 = 81

Hardware

OP5707XG

  • Motherboard: SuperMicro X11DPL-i
  • Processor: Intel(R) Xeon(R) Gold 5222 CPU @ 3.80GHz; 8 cores
  • RAM: 32 GB

Software

  • Platform: HYPERSIM
  • Compiler: Intel 2019 (19.03.199)

Minimum license required

HXG Plus (1 core, 180 nodes)

Results

  • Number of core(s): 1
  • Minimum time-step: 15 us *

* Performance under transient conditions varying considerably depending on the study type, this benchmark measures the minimum achievable time-step without overruns in steady-state conditions. A rule of thumb is to consider 10 to 20 % buffer time for calculations under transient conditions.

Benchmark

Performance comparison between new (OP5707XG) and previous (OP5700) hardware generations

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter