Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Load Flow Equivalent
Mask and Parameters
Description | Use this field to add all kinds of information about the component |
Type | Load flow model type |
---|---|
Swing | Fixed V (PQ balance) |
PV | Fixed P and V |
PQ | Fixed P and Q |
Voltage | Load flow constraint (pu) |
Angle | Load flow constraint (deg) |
Qmin | Minimum reactive power allowed in the load flow solution (var) |
Qmax | Maximum reactive power allowed in the load flow solution (var) |
P | Active power (W) |
Q | Reactive power (var) |
R | Internal resistance (ohm) |
L | Internal inductance (H) |
Ports, Inputs, Outputs and Signals Available for Monitoring
Ports
- Net_1: Network connection (supports only 3-phase connections)
Inputs
- None
Outputs
- None
Sensors
Angbus | Angle value at the connected bus; calculated by the load flow algorithm (deg) |
Angint | Angle value before the internal impedance; calculated by the load flow algorithm (deg) |
P | Active power at the connected bus; calculated by the load flow algorithm (MW) |
Q | Reactive power at the connected bus; calculated by the load flow algorithm (Mvar) |
Vbus | Voltage value at the connected bus; calculated by the load flow algorithm (PU) |
Vint | Voltage value before the internal impedance; calculated by the load flow algorithm (PU) |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter