Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8615-2 Connectors Requirements and Product Specifications

Connectors Requirements

Connectors used to plug to rear receivers require specific male connectors.
The part numbers provided are for reference purposes only and may differ according to suppliers and country.


Product Number

Manufacturer Name

Manufacturer Product Number




T00-5905VPC510161101Signal, Module, ITA,  QuadraPaddle, iCon Series, 160 Position1


T00-5907VPC610138109Signal, Contact, ITA, QuadraPaddle, 5 Amp, 22-24 AWG160


T00-5906VPC410128101ITA, i1, with Protective Cover1

Key way

T00-1204VPC310113461Keying Pin Kit, iSeries, Receiver and ITA1


Product name

Break-Out Box

Part number


Number of channels

128 channels, low current (5A)
32 Channels passthrough wire (5A)

Voltage range

0-30 Vdc

Form factor


Dimensions | HxWxD

13.33 x 48.26 x 30.8 cm (5.25” x 19” x 12.125”)

I/O connector

Front Banana JackSEB2-R 2 mm banana jack
JumperOPAL-RT P/N T00-0287, STAUBLI 65.9866-21, Banana Jumper 12mm, 2mm
Rear receiver: VPC 510160101 Receiver, QuadraPaddle, iCon, 160 Position

Operating temperature

10 to 40 °C (50 to 104 °F)

Storage temperature

-55 to 85 °C (-67 to 185ºF)

Relative humidity

10 to 90%, non-condensing

Maximum altitude

2 000 m (6,562 ft.)

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323