Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP8930 Pin Assignment
Before designing cables, OPAL-RT recommends using these guidelines: Simulator EMC cable recommendations.
J1/J2 HDB44 Connector Pinout
As explained in OP8930 Hardware Interface, both HDB44 connectors J1 and J2 share the same pin-out. The 16 analog I/O signals are routed to both J1 and J2 connectors. This allows, for example, splitting the input and output signals into two different cables.
8930 Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
Signal Name | A0+ | A1+ | A2+ | GND | A4+ | A5+ | A6+ | GND | A8+ | A9+ | A10+ | GND | A12+ | A13+ | A14+ |
Pin | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
Signal Name | A0- | A1- | A2- | GND | A4- | A5- | A6- | GND | A8- | A9- | A10- | GND | A12- | A13- | A14- |
| |||||||||||||||
Pin | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 |
|
Signal Name | A3- | A3+ | GND | GND | A7- | A7+ | GND | GND | A11- | A11+ | GND | GND | A15- | A15+ |
|
The direction of the signals A0 to A15 depend on the OP8930 assembly selected :
Part Number | Description | Analog In | Analog Out |
---|---|---|---|
OP8931 | ** REPLACED BY OP8934 *** 16 Aout differential from single ended input SLSC Conditioning Board | A0-A15 | |
OP8932 | 16 Ain differential to single ended SLSC Conditioning Board | A0-A15 | |
OP8933 | ** REPLACED BY OP8935 *** 8 Ain/8 Aout SLSC Conditioning Board | A0-A7 | A8-A15 |
OP8934 | 16 Aout differential from single ended input SLSC Conditioning Board | A0-A15 | |
OP8935 | 8 Ain/8 Aout SLSC Conditioning Board | A0-A7 | A8-A15 |
J3
GND | GND |
VBus_A | VBus_B |
XJ2 connector pinout
XJ2 Signal | OP8930 | XJ2 Pin | XJ2 Signal | OP8930 | XJ2 Pin | |
---|---|---|---|---|---|---|
P0.0 | A0 | a1 | P2.0 | A8 | a7 | |
P0.1 | GND | b1 | P2.1 | GND | b7 | |
P0.2 | A1 | d1 | P2.2 | A9 | d7 | |
P0.3 | GND | e1 | P2.3 | GND | e7 | |
P0.4 | A2 | a2 | P2.4 | A10 | a8 | |
P0.5 | GND | b2 | P2.5 | GND | b8 | |
P0.6 | A3 | d2 | P2.6 | A11 | d8 | |
P0.7 | GND | e2 | P2.7 | GND | e8 | |
GND | GND | a3 | GND | GND | a9 | |
GND | GND | b3 | GND | GND | b9 | |
GND | GND | c3 | GND | GND | c9 | |
GND | GND | d3 | GND | GND | d9 | |
GND | GND | e3 | GND | GND | e9 | |
P1.0 | A4 | a4 | P3.0 | A12 | a10 | |
P1.1 | GND | b4 | P3.1 | GND | b10 | |
P1.2 | A5 | d4 | P3.2 | A13 | d10 | |
P1.3 | GND | e4 | P3.3 | GND | e10 | |
P1.4 | A6 | a5 | P3.4 | A14 | a11 | |
P1.5 | GND | b5 | P3.5 | GND | b11 | |
P1.6 | A7 | d5 | P3.6 | A15 | d11 | |
P1.7 | GND | e5 | P3.7 | GND | e11 | |
GND | GND | a6 | GND | GND | a20 | |
GND | GND | b6 | GND | GND | b20 | |
GND | GND | c6 | GND | GND | c20 | |
GND | GND | d6 | GND | GND | d20 | |
GND | GND | e6 | GND | GND | e20 | |
GND | GND | a17 | GND | GND | a23 | |
GND | GND | b17 | GND | GND | b23 | |
GND | GND | c17 | GND | GND | c23 | |
GND | GND | d17 | GND | GND | d23 | |
GND | GND | e17 | GND | GND | e23 |
XJ3 connector pinout
XJ3 connector | Molex connector (on standard RTI) | XJ3 pin | OP8910 |
---|---|---|---|
H | VBus_A | ||
G | GND | ||
F | VBus_B | ||
E | GND | ||
D | VUser_1 | ||
C | GND | ||
B | VUser_2 | ||
A | GND |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter