General

Product Name	OP8930
Part Numbers	see OP8930 configurations options
Board Type	Analog input/output conditioning
Form Factor	SLSC
SLSC Module Design Specifications	Version 1.2.1
SLSC Compliance Level	OP8931/OP8932/OP8934: 1 OP8933/OP8935: 2
Rear I/O Compatibility	OP8931/OP8934: [02] (Up to 16 output differential channels) OP8932: [03] (Up to 16 input differential channels) OP8933/OP8935: [P5] (Up to 8 input channels on bank 1-2 and Up to 8 output channels on bank 3-4)
Hot-Plug support	No

Characteristics

	PCB Rev. 1	PCB Rev. 2
Number of channels	16 input or output channels Number of input /outputs depend on assembly selected. See OP8930 configurations options	16 input or output channels Number of input /outputs depend on assembly selected. See OP8930 configurations options
Max peak current with FIU	1A, see OP8900 SLSC Boards - FIU Description	1A, see OP8900 SLSC Boards - FIU Description
Analog Inputs
Voltage Range	From unit under test: ±10V or ±30V differential (fix range) To PXI chassis: ±10V single-ended	From unit under test: ±10V or ±30V differential (software selectable) To PXI chassis: ±10V single-ended
Bandwidth (-3dB)	500 kHz	250 kHz
Differential Input Impedance	1MOhm	1MOhm
Voltage Protection	100V	100V
Analog Outputs
Voltage Range	From PXI chassis: ±10V single-ended To unit under test: ±20V differential (OP8934/OP8935) To unit under test: ±10V differential (OP8931/OP8933)	From PXI chassis: ±10V single-ended To unit under test: ±20V differential (OP8934/OP8935) To unit under test: ±10V differential (OP8931/OP8933)
Maximum current	±50mA/channel, 250mA/board	±50mA/channel, 250mA/board
Bandwidth (-3dB)	500 kHz	250 kHz
Output Impedance	25 Ohms	<2 Ohms
Voltage Protection	50VDC and 50VAC	60VDC and 60VAC
Short-circuit Protection (continuous)	150mA max	150mA max

The OP8930 is designed for indoor use only.

Module operating temperature	0 °C to 85 °C
Storage temperature	-40 °C to 85 °C
Operating humidity	10% to 90% non-condensing
Storage humidity	5% to 95% non-condensing
Pollution Degree	2
Maximum altitude	2,000 m
Power requirement	OP8931/OP8934 : 25W OP8932 : 10W OP8933/OP8935 : 18W