The OP8E06 module is designed to condition four low-voltage output signals coming for an OP5330 digital-to-analog converter module.

From these four signals, the module produces two isolated voltage outputs with high current capability (<250mA) and two standard analog voltage outputs.

Features

• 4 channels

• ±16V output range

• Shared galvanic isolation on first two channels

• Max current of isolated channels: 250mA

Board Layout

Open

OP8E06 - Top View

Channel Description

The module produces two isolated channels from the first two signals coming from the simulator. The other two signals are routed unchanged to the output of the module.

The output voltage swing for channels 1 & 2 is listed below:

• ±16V up to ±50mA

• ±15V @ 135mA

• ±13V @ 250mA

The other two channels exhibit the same swing as the OP5330, i.e. ±16V up to ±15mA.

Typical Application Diagram

Open

Pin Assignment

Refer to the OP8E00 Modules Pin Assignment table.