OP5511 Specifications

LEGACY PRODUCT

Please note that the OP5511 is discontinued.

Current and voltage sensor ranges must be specified at the time of purchase and will be factory configured. If any adjustments are required, contact OPAL-RT Technical Support.

PRODUCT NAME	OP5511
Part number	126-0215 (sensor input board) + 126-0217 (current/voltage sensor board)
Number of channels	4 voltage channels 4 current channels
Power supply	± 15V
Dimensions	4.57 x 16.60 x 16.35 cm (1.8 in x 6.5 3 x 6.43 in)
Signal conditioning connector	DB25F (in from simulator) Phoenix contact
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90%, non-condensing
Maximum altitude	2,000 m (6562 ft.)

CURRENT SENSOR CHANNEL

Input range factory setting	Default 50A (available in 5A, 15A, 25A)
Signal output range	± 10 volts (at the full range)
Isolation	Galvanic, 2.5 kV
Bandwidth	Default 100 kHz (-3dB) available in 200Hz, 2kHz, 20kHz

VOLTAGE SENSOR CHANNEL

Input range

Default 600 V ( available in 50 V, 100 V, 200 V or 400 V)

Signal output range

± 10 volts

Bandwidth

Default 100 kHz (-3dB)

available in 200Hz, 2kHz, 20kHz