OP5705XG Rear Connectors

LEGACY PRODUCT

Please note that OPAL-RT is no longer selling this product. Current users will continue to receive support until December 31, 2028.
For details about support, please refer to the End-of-Life Announcement. For any other questions, please contact your OPAL-RT sales representative.

A. DB37F I/O connectors (see OP5705XG IO Connectors for details).

B. Power reset and 5/12V power source connector for test purposes:

Pushbutton reset after 4A overcurrent shutdown.
Red LED indicates a fault, the green LED indicates a nominal function
Microfit connector for 5V or 12V power allows users to test whether I/Os are functioning.
- Each voltage has its own ground reference.
- Caution: these power sources are not isolated

C. Ground screw.

The OP5705XG may be subjected to Electromagnetic Interference (EMI) when it is installed in proximity to other devices.
Make sure to connect the OP5705XG ground to the rack to prevent any EMI related damage to the simulator.
See OP5705XG Installation and Configuration.

D. Power connector and Power On/Off switch.

E. Standard computer connectors (left to right):

VGA port
Dedicated IPMI LAN RJ45 port
2x USB 2.0 ports
2x LAN RJ45 port
Unit Identifier Switch

F. Slots for up to 5 PCI or PCIe optional interface cards

G. Serial port RS-232