Product Name

OP8930

Part Numbers

see OP8930 configurations options

Board Type

Analog input/output conditioning

Form Factor

SLSC

SLSC Module Design Specifications

Version 1.2.1

SLSC Compliance Level

OP8931/OP8932/OP8934: 1
OP8933/OP8935:               2

Rear I/O Compatibility

OP8931/OP8934: [02] (Up to 16 output differential channels)
OP8932:               [03] (Up to 16 input differential channels)
OP8933/OP8935: [P5] (Up to 8 input channels on bank 1-2 and Up to 8 output channels on bank 3-4)

Hot-Plug support

No

PCB Rev. 1

PCB Rev. 2

General

Number of channels

16 input or output channels

Number of input /outputs depend on assembly selected. See OP8930 configurations options

16 input or output channels

Number of input/outputs depend on assembly selected. See OP8930 configurations options

Max peak current with FIU

1A, see OP8900 SLSC Boards - FIU Description

1A, see OP8900 SLSC Boards - FIU Description

Analog Inputs

Voltage Range

From unit under test: ±10V or ±30V differential (fix range)
To PXI chassis: ±10V single-ended

From unit under test: ±10V or ±30V differential (software selectable)

To PXI chassis: ±10V single-ended

Exact transfer function

±10V: Vo = 1.0015 • Vi, ±0.8%

±30V: Vo = 0.3338 • Vi, ±0.8%

±10V: Vo = 1.0091 • Vi, ±0.6%

±30V: Vo = 0.3364 • Vi, ±0.8%

Bandwidth (-3dB)

500 kHz

250 kHz

Differential Input Impedance

1 MΩ

1 MΩ

Voltage Protection

100 V

100 V

Analog Outputs

Voltage Range

From PXI chassis: ±10V single-ended
To unit under test: ±20V differential (OP8934/OP8935)
To unit under test: ±10V differential (OP8931/OP8933)

From PXI chassis: ±10V single-ended
To unit under test: ±20V differential (OP8934/OP8935)
To unit under test: ±10V differential (OP8931/OP8933)

Exact transfer function

±20V: Vo = 2.000 • Vi, ±0.2%
±10V: Vo = 1.000 • Vi, ±0.2%

±20V: Vo = 2.004 • Vi, ±0.2%
±10V: Vo = 1.000 • Vi, ±0.2%

Maximum current

±50mA/channel, 250 mA/board

±50mA/channel, 250 mA/board

Bandwidth (-3dB)

500 kHz

250 kHz

Output Impedance

25 Ohms

<2 Ohms

Voltage Protection

50 VDC and 50 VAC

60 VDC and 60 VAC

Short-circuit Protection (continuous)

150 mA max

150 mA max

Module operating temperature

0 °C to 85 °C

Storage temperature

-40 °C to 85 °C

Operating humidity

10% to 90% non-condensing

Storage humidity

5% to 95% non-condensing

Pollution Degree

2

Maximum altitude

2,000 m

Power requirement

OP8931/OP8934: 25 W

OP8932: 10 W

OP8933/OP8935: 18 W

Intended use

The OP8930 is designed for indoor use only.