Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Test and Build the Code

Owned by Sylvain Ménard
Last updated: Mar 11, 2023
2 min read

Test the Code

  • Press the Run button in the DEBUG tab to test the code.

  • The model should run without error.

Build the Code

  • Build the code by clicking on Build, deploy & Start -> Build Stand-Alone in the HARDWARE tab.

 

  • The code will be placed under the working folder, and it needs to be the same as the CCSv11 project folder.

  • If the build is successful, you should get the following message at the bottom of your Diagnostic Viewer. 

  • The generated code was put in a folder:

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter