Documentation Home Page ◇ RT-LAB Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OpNI60xE Digital In
Block
Mask
Description
The National InstrumentsESeries (or NI60xE) cards feature analog inputs, analog outputs, digital I/O lines and counters. This block monitors a user-defined subset of the 8 digital I/O lines, and configures these channels in input mode.
This block supports a list of PXI and PCI compatible cards selectable from popup menus.
Note: the cards PCI-6025Eand PXI-6025E hold 3 additional I/O ports of 8 lines each. These additional ports use the chipset 8255 and are not bi-directional: the 8 lines of these ports must all be used either in input or in output mode.
Parameters
Bus Type | Select the bus type (PCI or PXI) of the target node in this list. |
---|---|
Card Type | Select the card model in this list. |
PCI index | Enter the PCI index (see definition)of the card on the PCI (or PXI) bus. |
Port | This pop-up menu appears only if one the PCI-6025E or PXI-6025E cards is selected. It allows the user to access the additional I/O ports B, C or D. PortA refers to the 8 standard NI60xE I/O lines. A different Op NI60xEDigital In block must be used for each I/O port. |
Selection of channels used in input | Enter the vector of channel numbers to be monitored by this block. The channel numbers, in the range [0-7], can be entered in any order and must appear only once in the list. |
Synchro | see definition. |
Sample Time (s) | see definition. |
Inputs
This block has no inputs.
Outputs
At each calculation step of the model, the block returns the current values (0 or 1) on the I/O lines. Only the values of the channels specified in the channel list parameter are returned and the outputs are in the order of the channel list parameter. The width of the output port of the block must be equal to the number of entries in the channel list parameter. Use a demux to connect individual outputs to the rest of the model.
Characteristics and Limitations
Connector Pin Assignments
The following table gives the description of the signals related to the digital input channels and is followed by the connector pin assignments of the various NIESeries card models.
Signal Name | Signal Description |
---|---|
DIO0..7 | Digital IO lines |
DGND | Digital ground |
PA0..7, PB0..7, PC0..7 | [6025E only] Additional DIO lines |
1) Cards NI-6070E (MIO-16E-1),NI-6052E, NI-6040E (MIO-16E-4), NI-6036E, NI-6035E, NI-6034E, NI-6032E, NI-6030E (MIO-16XE-10), NI-6024E,NI-6023E, NI-6011E (MIO-16XE-50):
68-pin I/O
Pin | Description | Pin | Description |
---|---|---|---|
34 | ACH8 | 68 | ACH0 |
33 | ACH1 | 67 | AIGND |
32 | AIGND | 66 | ACH9 |
31 | ACH10 | 65 | ACH2 |
30 | ACH3 | 64 | AIGND |
29 | AIGND | 63 | ACH11 |
28 | ACH4 | 62 | AISENSE |
27 | AIGND | 61 | ACH12 |
26 | ACH13 | 60 | ACH5 |
25 | ACH6 | 59 | AIGND |
24 | AIGND | 58 | ACH14 |
23 | ACH15 | 57 | ACH7 |
22 | DAC0OUT | 56 | AIGND |
21 | DAC1OUT | 55 | AOGND |
20 | EXTREF | 54 | AOGND |
19 | DIO4 | 53 | DGND |
18 | DGND | 52 | DIO0 |
17 | DIO1 | 51 | DIO5 |
16 | DIO6 | 50 | DGND |
15 | DGND | 49 | DIO2 |
14 | +5V | 48 | DIO7 |
13 | DGND | 47 | DIO3 |
12 | DGND | 46 | SCANCLK |
11 | PFI0/TRIG1 | 45 | EXTSTROBE |
10 | PFI1/TRIG2 | 44 | DGND |
9 | DGND | 43 | PFI2/CONVERT |
8 | +5V | 42 | PFI3/GPCTR1_SOURCE |
7 | DGND | 41 | PFI4/GPCTR1_GATE |
6 | PFI5/UPDATE | 40 | GPCTR1_OUT |
5 | PFI6/WFTRIG | 39 | DGND |
4 | DGND | 38 | PFI7/STARTSCAN |
3 | PFI9/GPCTR0_GATE | 37 | PFI8/GPCTR0_SOURCE |
2 | GPCTR0_OUT | 36 | DGND |
1 | FREQ_OUT | 35 | DGND |
2) Cards NI-6071E, NI-6033E, NI-6031E:
100-pin I/O
Pin | Description | Pin | Description |
---|---|---|---|
1 | AIGND | 51 | ACH16 |
2 | AIGND | 52 | ACH24 |
3 | ACH0 | 53 | ACH17 |
4 | ACH8 | 54 | ACH25 |
5 | ACH1 | 55 | ACH18 |
6 | ACH9 | 56 | ACH26 |
7 | ACH2 | 57 | ACH19 |
8 | ACH10 | 58 | ACH27 |
9 | ACH3 | 59 | ACH20 |
10 | ACH11 | 60 | ACH28 |
11 | ACH4 | 61 | ACH21 |
12 | ACH12 | 62 | ACH29 |
13 | ACH5 | 63 | ACH22 |
14 | ACH13 | 64 | ACH30 |
15 | ACH6 | 65 | ACH23 |
16 | ACH14 | 66 | ACH31 |
17 | ACH7 | 67 | ACH32 |
18 | ACH15 | 68 | ACH40 |
19 | AISENSE | 69 | ACH33 |
20 | DAC0OUT | 70 | ACH41 |
21 | DAC1OUT | 71 | ACH34 |
22 | EXTREF | 72 | ACH42 |
23 | AOGND | 73 | ACH35 |
24 | DGND | 74 | ACH43 |
25 | DIO0 | 75 | AISENSE2 |
26 | DIO4 | 76 | AIGND |
27 | DIO1 | 77 | ACH36 |
28 | DIO5 | 78 | ACH44 |
29 | DIO2 | 79 | ACH37 |
30 | DIO6 | 80 | ACH45 |
31 | DIO3 | 81 | ACH38 |
32 | DIO7 | 82 | ACH46 |
33 | DGND | 83 | ACH39 |
34 | +5V | 84 | ACH47 |
35 | +5V | 85 | ACH48 |
36 | SCANCLK | 86 | ACH56 |
37 | EXTSTROBE | 87 | ACH49 |
38 | PFIO0/TRIG1 | 88 | ACH57 |
39 | PFI1/TRIG2 | 89 | ACH50 |
40 | PFI2/CONVERT | 90 | ACH58 |
41 | PFI3/GPCTR1_SOURCE | 91 | ACH51 |
42 | PFI4/GPCTR1_GATE | 92 | ACH59 |
43 | GPCTR1_OUT | 93 | ACH52 |
44 | PFI5/UPDATE | 94 | ACH60 |
45 | PFI6/WFTRIG | 95 | ACH53 |
46 | PFI7/STARTSCAN | 96 | ACH61 |
47 | PFI8/GPCTR0_SOURCE | 97 | ACH54 |
48 | PFI9/GPCTR0_GATE | 98 | ACH62 |
49 | GPCTR0_OUT | 99 | ACH55 |
50 | FREQ_OUT | 100 | ACH63 |
3) Cards NI-6025E
100-pin I/O
Pin | Description | Pin | Description |
---|---|---|---|
1 | AIGND | 51 | PC7 |
2 | AIGND | 52 | GND |
3 | ACH0 | 53 | PC6 |
4 | ACH8 | 54 | GND |
5 | ACH1 | 55 | PC5 |
6 | ACH9 | 56 | GND |
7 | ACH2 | 57 | PC4 |
8 | ACH10 | 58 | GND |
9 | ACH3 | 59 | PC3 |
10 | ACH11 | 60 | GND |
11 | ACH4 | 61 | PC2 |
12 | ACH12 | 62 | GND |
13 | ACH5 | 63 | PC1 |
14 | ACH13 | 64 | GND |
15 | ACH6 | 65 | PC0 |
16 | ACH14 | 66 | GND |
17 | ACH7 | 67 | PB7 |
18 | ACH15 | 68 | GND |
19 | AISENSE | 69 | PB6 |
20 | DAC0OUT | 70 | GND |
21 | DAC1OUT | 71 | PB5 |
22 | RESERVED | 72 | GND |
23 | AOGND | 73 | PB4 |
24 | DGND | 74 | GND |
25 | DIO0 | 75 | PB3 |
26 | DIO4 | 76 | GND |
27 | DIO1 | 77 | PB2 |
28 | DIO5 | 78 | GND |
29 | DIO2 | 79 | PB1 |
30 | DIO6 | 80 | GND |
31 | DIO3 | 81 | PB0 |
32 | DIO7 | 82 | GND |
33 | DGND | 83 | PA7 |
34 | +5V | 84 | GND |
35 | +5V | 85 | PA6 |
36 | SCANCLK | 86 | GND |
37 | EXTSTROBE | 87 | PA5 |
38 | PFIO0/TRIG1 | 88 | GND |
39 | PFI1/TRIG2 | 89 | PA4 |
40 | PFI2/CONVERT | 90 | GND |
41 | PFI3/GPCTR1_SOURCE | 91 | PA3 |
42 | PFI4/GPCTR1_GATE | 92 | GND |
43 | GPCTR1_OUT | 93 | PA2 |
44 | PFI5/UPDATE | 94 | GND |
45 | PFI6/WFTRIG | 95 | PA1 |
46 | PFI7/STARTSCAN | 96 | GND |
47 | PFI8/GPCTR0_SOURCE | 97 | PA0 |
48 | PFI9/GPCTR0_GATE | 98 | GND |
49 | GPCTR0_OUT | 99 | +5V |
50 | FREQ_OUT | 100 | GND |
Direct Feedthrough | No |
---|---|
Discrete sample time | No |
XHP support | Yes |
Work offline | No |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter