MMC Test Bench General Specifications

OPAL-RT Lab-Scale MMC Test Bench specifications for a MMC Full Bridge, 11 levels, 400V, 6kW.

Product name	MMC Test Bench
Part number	429-0500-0068
Included products	OP4510 RT-LAB RCP/HIL System OP1210 10 FB/HB Sub Modules OP1260 Protection Box OP1261 Measurement Box OP1262 Inductance Box
Nominal DC voltage	400 Vdc
Nominal DC Current	15 A DC
Nominal AC Voltage	120/208 V rms (3ph)
Nominal AC current	16.7 A rms
Nominal Output Power	6 kW
Total number of submodule	60
Submodule capacitor (typical)	5 mF
Nominal submodule voltage	40 V
Arm inductor (1 inductor box)	2.5 mH
Auxiliary control voltage (power bar)	North America:100-120V ac, 60 Hz Europe: 200-240 Vac, 50 Hz
Rack dimensions (HxWxD)	196.37 x 58.42 x 91.44cm (77.31” x 23” x 36”)
Rack weight	427.28 Kg (942 lbs)
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90% non-condensing
Maximum altitude	2000 m (6562 ft.)

OP1210 Specifications

Product name	OP1210 MMC 10 Cells FB/HB
Part number	429-0500-0048
Number of submodules	10
Submodule topology	Full-bridge or emulated or hard wired half-bridge
Switch technology	MOSFET
Nominal voltage	40 V
Maximum continuous current	15 A rms
Maximum submodule switching frequency	10 kHz
Submodule capacitor (typical)	5 mF
Serial communication data rate	10/50 Mbps (Tx/Rx)
Switch state refresh rate	500 ns
Measurement refresh rate	20 us
Submodule Voltage measurement range	0 to 80 V
Voltage resolution	12 bit
Arm current measurement range	-29.9 to 29.9 A
Arm current resolution	12 bit
Hardware overcurrent protection level	45 A
Hardware overvoltage protection level	60 V
Auxiliary supply voltage	48 Vdc
Dimensions (WxDxH)	43.2 x 54.6 x 8.9cm (17” x 21.5” x 3.5”)
Weight	Approx. 12.7 Kg (28 lbs)
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90% non-condensing
Maximum altitude	2000 m (6562 ft.)

Product name	OP1260 Protection Box
Part number	429-0500-0050
Nominal AC voltage rating	120/208 Vac
Nominal DC voltage rating	400 V dc
DC overvoltage protection	540 V dc
AC overvoltage protection	270 V rms phase to phase
DC fuse rating	30 A dc (greater than the converter nominal current)
DC fuse type	KLK030
AC breaker rating	32 A rms (greater than the converter nominal current)
Auxiliary supply voltage range	90 to 265 Vrms, 50-60 Hz
Auxiliary supply fuse	3 A
Power connector mating	Phoenix P/N 1777875
Dimensions (WxDxH)	43.2 x 53.34 x 17.8 cm (17” x 21” x 7”)
Weight	Approx. 14.5 Kg (32 lbs)
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90% non-condensing
Maximum altitude	2000 m (6562 ft.)

Product name	OP1261 Measurement Box
Part number	429-0300-0051
AC circuit current rating	32 A (greater than the converter nominal current)
DC circuit current rating	30 A (greater than the converter nominal current)
AC/DC precharge resistor value	47 ohm
Precharge resistor overtemperature protection	65 °C
DC line voltage measurement range	- 600V to 600V
AC line voltage measurement range	Phases AN, BN, CN: - 600V to 600V
DC line current measurement	-50 to 50 A
AC line current measurement	Phases A, B and C: - 50 to 50 A
48 V supply maximum power	480W
Auxiliary supply voltage range	North America:100-120V ac, 60 Hz Europe: 200-240 Vac, 50 Hz (Warning, must be adapted manually)
Auxiliary supply fuse	3 A
Power connector mating	Phoenix P/N 1777875
Dimensions (WxDxH)	43.2 x 53.34 x 17.8 cm (17” x 21” x 7”)
Weight	Approx. 17.23 Kg (38 lbs)
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90% non-condensing
Maximum altitude	2000 m (6562 ft.)

Product name	OP1262 Inductance Box
Part number	429-0300-0052
Maximum voltage	600 Vac (Power circuit to case)
Dielectric test (by supplier)	2500 Vac
Typical inductance	2.5 mH
Maximum RMS current (with typical)	30 A
Saturation current	Approx. 60 A (with typical)
Power connector mating	Phoenix P/N 1777875
Dimensions (WxDxH)	43.2 x 53.34 x 17.8 cm (17” x 21” x 7”)
Weight	Approx. 42.64 Kg (94 lbs)
Operating temperature	10 to 40 ºC (50 to 104ºF)
Storage temperature	-55 to 85ºC (-67 to 185ºF)
Relative humidity	10 to 90% non-condensing
Maximum altitude	2000 m (6562 ft.)