Documentation Home Page ◇ Cell Monitoring Device Emulation Add-On for NI VeriStand Home page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Deployment Target
The VeriStand engine must be installed onto the Real Time target before a project can be deployed to it. The VeriStand version installed on the deployment target must match the development version.
The CMDE Add-On is supported on NI PXI targets running the NI Linux RT operating system. For more information about NI Real-Time target OS support, refer to NI Hardware and Software Operating System Compatibility.
Supported RT Operating Systems |
---|
NI Linux RT |
Software Installation on NI Linux-RT Targets
Use the NI Measurement and Automation Explorer to set up the target and install the required software packages described below. Detailed instructions for the installation process can be found on the NI website:
See the How-to section of this Wiki for help configuring a system with no connection to the internet:
Base System Image
When selecting a Base System Image during the installation, use the latest version available. Confirm that it meets the minimum version requirement:
Required Base System Image |
---|
Linux RT System Image 21.5+ |
Programming Environment
Select the Programming Environment corresponding to your version of VeriStand:
Programming Environment | VeriStand Engine Version |
---|---|
LabVIEW 2024 | 2024 (24.x.x) |
LabVIEW 2023 | 2023 (23.x.x) |
LabVIEW 2021 | 2021 (21.x.x) |
Software Packages
Select the required software from the list of available packages and enable Include recommended packages to ensure that all necessary dependencies are installed onto the target.
Required Target Software Packages |
---|
NI VeriStand Engine |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter