Block

Mask

Description

The National InstrumentsESeries (or NI-60xE) cards feature analog inputs, analog outputs, digital I/O lines and counters. This block monitors a user-defined subset of the 8 digital I/O lines and configures these channels in output mode.

This block supports a list of PXI and PCI compatible cards selectable from popup menus.

Note: The cards PCI-6025Eand PXI-6025E hold 3 additional I/O ports of 8 lines each. These additional ports use the chipset 8255 and are not bi-directional: the 8 lines of these ports must all be used either in input or in output mode.

Parameters

Bus Type	Select the bus type (PCI or PXI) of the target node in this list.
Card Type	Select the card model on this list.
PCI index	Enter the PCI index (see definition)of the card on the PCI (or PXI) bus.
Port	This pop-up menu appears only if one the PCI-6025E or PXI-6025E cards is selected. It allows the user to access the additional I/O ports B, C or D. PortA refers to the 8 standard NI60xE I/O lines. A different Op NI60xEDigital Out block must be used for each I/O port.
Selection of channels used in the output	Enter the vector of channel numbers to be controlled by this block. The channel numbers, in the range [0-7], can be entered in any order and must appear only once in the list.
Synchro	see definition.

Inputs

At each calculation step of the model, the block outputs to the I/O lines the values calculated in the model.

Three sets of input values must be specified:

Reset	Values that will be written to the selected I/O channels when the reset button is hit.
Pause	Values that will be written to the selected I/O channels when the model is in pause mode, that is at initialization or when the pause button is hit.
Run	Values that will be written to the selected I/O channels at each time step.

Note: For the pause and reset values to be properly written out, it is recommended to set these values in the model subsystem that contain the Op NI60xE Digital Out block, and not to provide them from the console subsystem.

Outputs

This block has no outputs.

Characteristics and Limitations

Connector Pin Assignments

The following table gives the description of the signals related to the digital output channels and is followed by the connector pin assignments of the various NIESeries card models.

Signal Name	Signal Description
DIO0..7	Digital IO lines
DGND	Digital ground
PA0..7, PB0..7, PC0..7	[6025E only] Additional DIO lines

1) Cards NI-6070E (MIO-16E-1),NI-6052E, NI-6040E (MIO-16E-4), NI-6036E, NI-6035E, NI-6034E, NI-6032E, NI-6030E (MIO-16XE-10), NI-6024E,NI-6023E, NI-6011E (MIO-16XE-50):

68-pin I/O

Pin	Description	Pin	Description
34	ACH8	68	ACH0
33	ACH1	67	AIGND
32	AIGND	66	ACH9
31	ACH10	65	ACH2
30	ACH3	64	AIGND
29	AIGND	63	ACH11
28	ACH4	62	AISENSE
27	AIGND	61	ACH12
26	ACH13	60	ACH5
25	ACH6	59	AIGND
24	AIGND	58	ACH14
23	ACH15	57	ACH7
22	DAC0OUT	56	AIGND
21	DAC1OUT	55	AOGND
20	EXTREF	54	AOGND
19	DIO4	53	DGND
18	DGND	52	DIO0
17	DIO1	51	DIO5
16	DIO6	50	DGND
15	DGND	49	DIO2
14	+5V	48	DIO7
13	DGND	47	DIO3
12	DGND	46	SCANCLK
11	PFI0/TRIG1	45	EXTSTROBE
10	PFI1/TRIG2	44	DGND
9	DGND	43	PFI2/CONVERT
8	+5V	42	PFI3/GPCTR1_SOURCE
7	DGND	41	PFI4/GPCTR1_GATE
6	PFI5/UPDATE	40	GPCTR1_OUT
5	PFI6/WFTRIG	39	DGND
4	DGND	38	PFI7/STARTSCAN
3	PFI9/GPCTR0_GATE	37	PFI8/GPCTR0_SOURCE
2	GPCTR0_OUT	36	DGND
1	FREQ_OUT	35	DGND

2) Cards NI-6071E, NI-6033E, NI-6031E:

100-pin I/O

Pin	Description	Pin	Description
1	AIGND	51	ACH16
2	AIGND	52	ACH24
3	ACH0	53	ACH17
4	ACH8	54	ACH25
5	ACH1	55	ACH18
6	ACH9	56	ACH26
7	ACH2	57	ACH19
8	ACH10	58	ACH27
9	ACH3	59	ACH20
10	ACH11	60	ACH28
11	ACH4	61	ACH21
12	ACH12	62	ACH29
13	ACH5	63	ACH22
14	ACH13	64	ACH30
15	ACH6	65	ACH23
16	ACH14	66	ACH31
17	ACH7	67	ACH32
18	ACH15	68	ACH40
19	AISENSE	69	ACH33
20	DAC0OUT	70	ACH41
21	DAC1OUT	71	ACH34
22	EXTREF	72	ACH42
23	AOGND	73	ACH35
24	DGND	74	ACH43
25	DIO0	75	AISENSE2
26	DIO4	76	AIGND
27	DIO1	77	ACH36
28	DIO5	78	ACH44
29	DIO2	79	ACH37
30	DIO6	80	ACH45
31	DIO3	81	ACH38
32	DIO7	82	ACH46
33	DGND	83	ACH39
34	+5V	84	ACH47
35	+5V	85	ACH48
36	SCANCLK	86	ACH56
37	EXTSTROBE	87	ACH49
38	PFIO0/TRIG1	88	ACH57
39	PFI1/TRIG2	89	ACH50
40	PFI2/CONVERT	90	ACH58
41	PFI3/GPCTR1_SOURCE	91	ACH51
42	PFI4/GPCTR1_GATE	92	ACH59
43	GPCTR1_OUT	93	ACH52
44	PFI5/UPDATE	94	ACH60
45	PFI6/WFTRIG	95	ACH53
46	PFI7/STARTSCAN	96	ACH61
47	PFI8/GPCTR0_SOURCE	97	ACH54
48	PFI9/GPCTR0_GATE	98	ACH62
49	GPCTR0_OUT	99	ACH55
50	FREQ_OUT	100	ACH63

3) Cards NI-6025E