Block

Mask

CanDB PCI Controller Block Basic Mask

CanDB File Selection and Management GUI

Description

This block combines the functionality of a CanAc2 Controller block with the added capability of automatically generating a series of Send/ReceiveOpCanAc2-based blocks.

These have been configured to support the following capabilities:

Automatic generation/configuration of OpCanAc2 Send/Receive blocks based on information from the selected CanDB file
Automatic generation of per-signal scaling blocks based on information from the selected CanDB file
Dynamic block scheduling policy selection through a customized OpCanAc2 Send block mask

Parameters

Configure System From CanDB	This check box launches the CanDB File Management panel and allows the inport of CanBus messages found and defined in the CanDB file.
Current database filename	Informs on the last opened and processed CanDB file. If no CanDB file has previously been used, the value displayed is None.
Controller ID	See OpCanAc2 Controller documentation.
PCI index	See OpCanAc2 Controller documentation.
Plug-in module	See OpCanAc2 Controller documentation.
Channel	See OpCanAc2 Controller documentation.
Baud Rate	See OpCanAc2 Controller documentation.
BAUD RATE: presc	See OpCanAc2 Controller documentation.
BAUD RATE: sjw	See OpCanAc2 Controller documentation.
BAUD RATE: tseg1	See OpCanAc2 Controller documentation.
BAUD RATE: tseg2	See OpCanAc2 Controller documentation.
BAUD RATE: sam	See OpCanAc2 Controller documentation.
Use send enable inport	See OpCanAc2 Controller documentation.
Perform signal rounding	This parameter provokes send signals to be rounded to the nearest integer at the model level (within the scaling process), before they are sent to CanAc2 card registers.

Inputs

This block has no inputs.

Outputs

This block has no outputs.

Characteristics and Limitations

Direct Feedthrough	N/A
Discrete sample time	N/A
XHP support	Yes
Work offline	No

RT-LAB Documentation

OpCanAc2 CanDB PCI Ctrl