Block

Mask

Description

This block is used to receive data from either Masters or Slaves.

This block behaves very similar to an OpCanAc2 Recv block; in addition, it does the scaling of the received signals according to the rules stated in LDF file used to create this block.

Parameters

Node Name	The name of the node to which the message is attached. If the LIN frame is not attached to any node, the name displayed is (Void).
MSG Name	The name of the LIN frame.
Controller Id	See OpCanAc2 Recv documentation.
CAN ID Offset	This parameter is directly related to a parameter (same name) of PCAN-LIN Configuration tool. Both values should match in order to have this block functional. This parameter should be entered in decimal format. For further details please refer to Parameters Definitions of PCAN-LIN configuration tool.

Note: This file is accessible through help file of example model_1 of PEAK Systems product.

Inputs

This block has no inputs.

Outputs

Frame Information Output

This output is of the type OpCanAc2 Recv with scaling capabilities defined in LDF file used to create this block; this output carries a Simulink signal which describes the specific LIN frame associated with the block.
For further details please refer to OpCanAc2 Recv documentation.

Characteristics and Limitations

This block is an auto-generated masked subsystem and there is no rtio library associated to it.

Direct Feedthrough	N/A
Discrete sample time	N/A
XHP support	Yes
Work offline	No

RT-LAB Documentation

OpCanAc2 LDF RecvData