Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Generic RLC


The series generic RLC filter is available both for 1-phase and 3-phase connections. It's also available with an internal grounding connection to reduce the matrix size.

Table of Contents

Mask and Parameters

The series generic RLC filter consists of a specific RLC combination as shown in the figure above.

To specify the parameters of a filter, SI units are always used. The PU unit system is not available for all filter models.

Ports, Inputs, Outputs and Signals Available for Monitoring


This component supports 1-phase and 3-phase connections and all ports are updated automatically upon connection.

  • Net_+: Positive network connection
  • Net_-: Negative network connection


  • None


  • None


Since the filters are simulated as elements forming a whole and not as individual elements, the following signals are made available through the sensors for acquisition:

  • I: Current in (A) when using in a 1-phase network
  • I(a,b,c): Current in (A) for each phase when using in a 3-phase network

Hence the values of the current flowing in the individual elements are not available.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323