/

Step 8.4: Setting Digital Input Sensors

Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Step 8.4: Setting Digital Input Sensors

Owned by Sylvain Ménard

Last updated: Nov 29, 2024

1 min read

As with the analog input, a special block is needed for the digital input.

The Target input, digital network component is found in the Target Inputs and Outputs library.

Connect it to a bus for task mapping purposes.

Right-click the digital input block and select Open Sensors From to open the sensor parameters, and set the values as shown.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter