Documentation Home Page ◇ ePHASORSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Current Injector
On this page:
The current injector is used to externally inject current using I/O pins at a specific bus. The inputs are RMS value and angle.
Note: The RMS value must be in p.u. (in-network base) for positive sequence models, otherwise, it must be in A.
Current injector parameters
| Symbol | Description | Unit |
Bus | Bus name (Bus ID) | a unique name |
|---|---|---|
ID | Name of the current source | a unique name |
Available I/O pins
No | Pin Description | Pin Type | Value/Unit | Instruction |
1 | Set/Get current magnitude of Current Injector | I/O | A or p.u. (RMS) | itemID/Imag |
2 | Set/Get current angle of Current Injector | I/O | Degree | itemID/Iang |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323