SCHEMATIC EDITOR WORKFLOW

Single location : OpalBoardsAddons

All the content produced by FPGA Power electronic toolbox is located in the folder

Then

Most data are internal in that workflow. Only logs are available.

Each circuit simulated on a given chassis has a specific ID and contains all configurations associated.

Name	Description	Status

Name	Description	Status
^{Autoconnections}	folder contains a single autoconnection files	Mandatory for RT-LAB Absent for HYPERSIM
^{addonconnectables.json}	Block description	Absent for RT-LAB Mandatory for HYPERSIM
^{opalboardsaddons.json}	Glossary of all components to configure in the FPGA	Mandatory
^{eHSScenarios.bin}	FPGA binary Scenario from CPU stream	Depends on the circuit
^ehs.json ^ehs_X.bin	Configuration and FPGA binary configuration streams for eHS solver	Mandatory
^air.json ^air_X.bin	Configuration and FPGA binary configuration stream for Analog In	Depends on the circuit
^pmsm.json ^pmsm_X.bin	Configuration and FPGA binary configuration stream for PMSM VDQ	Depends on the circuit
^pmsmsh.json ^pmsmsh_X.bin	Configuration and FPGA binary configuration stream for PMSM SH	Depends on the circuit
^gm.json ^gm_X.bin	Configuration and FPGA binary configuration stream for SCIM and DFIM	Depends on the circuit
^swg.json	Configuration for Sine Wave Generator	Depends on the circuit
^aomr.json ^aomr_X.bin	Configuration and FPGA binary configuration stream for Analog Out	Depends on the circuit

eHS Build Report : Contains advanced circuit information such as effective and minimum achievable time-step and all eHS input and generated outputs.
FpgaGenerator.log : Logs file dedicated to OPAL-RT support for internal diagnostic.