Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Resistive Sensor Module features overview
Introduction
The Resistive Sensor Module card is used to simulate sensors which behave as variable resistors. It holds 12 programmable channels, each of them having a 20-bit resolution over the 0.5Ω to 200 kΩ range. Each channel is rated for 1/4W dissipation into the programmed resistance.
The channels' electronic circuit is described in the resistive sensor section.
Up to 10 RSM cards can be inserted in one OP6200 chassis, although the reference model typically uses a maximum of 3 cards.
The board also has the following capabilities :
- Selection of termination voltage for each channel
- Over current protection
The board also supports the following features, which are common to all OP6200 I/O boards :
- Over-temperature detection
- Battery voltage compatibility
- Module information
- Activity and status LEDs
- Firmware Update
- Synchronization
- Cable Identification
Architecture Overview
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter