Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Analog Sensor Module features overview

Introduction

The Analog Sensor card is used to provide to the ECU sixteen analog signals, simulating analog sensor outputs.  Each output signal can be adjusted within a voltage range specified by high/low reference voltages supplied to the card. 

Up to 10 ASM cards can be inserted in one OP6200 chassis, although the reference model typically uses a maximum of 3 cards.

The board also has the following capabilities :


The board  also supports the following features, which are common to all OP6200 I/O boards :

Architecture Overview


OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter