Introduction

This block configures external capacitors connected to SMs defined in VSC Configuration Block.

Mask and Parameters

Name	Description	Unit
External Cap ID	ID number of external capacitor. The ID number should be number as the same sequence as defined in VSC Configuration Block.
Branch type	defines the branch type including capacitor or capacitor and resistor in parallel
Capacitance	defines the capacitance	F
Set the initial capacitor voltage	defines the initial capacitor voltage	V
Resistance	defines the resistance	Ohms

Name	Description
Conn1	power connector 1
Conn2	power connector 2

Name	Description
in	input of controllable current source

Name	Description	Unit
meas	measurements of dc current and voltage