1.7 Configuring the Waveforms of the Simulation

In the user interface, we would like to display some of the signals and measurements generated on the FPGA during the simulation. To stream signals from the FPGA at a rate faster than that of the CPU execution, we can assign certain VeriStand channels to the Waveform Acquisition engines.

• In the Configuration Tree, expand Circuit Model >> Waveforms. Notice that 32 Waveform channels are available to be mapped to different signal sources.

• Click Waveforms to open the configuration page.

• Map VeriStand Channel signals to the Waveform channels as shown below.  The data from these channels will be streamed at the Sample Rate (S/s) specified at the bottom of the page.

• Click Save.