Documentation Home Page Specialized Solutions Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP1210 MMC 10 Cells FB/HB

The OP1210 is a sub-module unit that houses 10 sub-modules to create an MMC arm. It can be configured in the standard half-bridge or the optional full-bridge topology.

The user has three options when using the sub-modules in the OP1210 (see OP1210 Submodule Options). The first two options are software-controlled, using the model, and the third option is hardware-controlled and must be specified at the time of purchase:

Use the sub-modules as:

  • full-bridge cells (FB), which means there are 4 active switches (2 half-bridge). 
  • “emulated” half-bridge cells (HB): 2 switches are active and the 2 others are disabled in the software (switch state is forced to make a half-bridge cell topology). 
  • “hardware” half-bridge cells (HB): a jumper is used to make to bypass the second half-bridge (must be factory configured). 

Features

  • Hardware instantaneous overcurrent and overvoltage detection
  • Arm bypass electronic switch (thyristor)
  • Fiber-optic communication with OP4510
  • Arm current measurement
  • Sub-module capacitor voltage measurement
  • 500 ns switch state refresh rate
  • 20 us measurement sample rate
  • Optional AAC directional switch

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter