On this page:

The current injector is used to externally inject current using I/O pins at a specific bus. The inputs are RMS value and angle.

Note
The RMS value must be in p.u. (in-network base) for positive sequence models, otherwise, it must be in A.

Parameters

Symbol	Description	Unit

Symbol	Description	Unit
Bus	Bus name (Bus ID)	a unique name
ID	Name of the current source	a unique name

Available I/O pins

No	Pin Description	Pin Type	Value/Unit	Instruction

No	Pin Description	Pin Type	Value/Unit	Instruction
1	Set/Get current magnitude of Current Injector	I/O	A or p.u. (RMS)	itemID/Imag
2	Set/Get current angle of Current Injector	I/O	Degree	itemID/Iang