TestView Command | Main | CmdLine

The CmdLine command is used to execute commands directly to one of the following lower-level controllers: the graphical interface (HyWorks), the simulation engine (HyEngine), or the HyCore.

Note that this command it's an advanced command and can be used for debugging purposes.

To use this command, enter a title if you want to, select the controller, write the command in the field CmdLine and click on Add. The results from the commands will be displayed in the stdout console.

Connection

The destination of the commands is determined by the connection mode set at the TestView level. If TestView has a "HyperWorks" connexion, HyEngine commands are ignored.

Example

HyWorks getDesignIds; HyEngine getId; HyCore status

stdout

--------------------------------------------------------------------------------
Starting [Test]
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CmdLine_1: [HyWorks] --- getDesignIds
1,localhost:1,C:\Users\Opal-RT Technologies\Documents\HYPERSIM\HVAC_500kV_6Bus\HVAC_500kV_6Bus.ecf

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CmdLine_1: [HyEngine] --- getId
WARNING: [HyEngine] - getId --- ignored !
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CmdLine_1: [HyCore] --- status
hypersim.dir=C:\OPAL-RT\HYPERSIM\hypersim_2021.1.0
hycore.availableProcessors=8
hycore.ident=/C:/OPAL-RT/HYPERSIM/hypersim_2021.1.0/Windows/HyCore/lib/HyCore.jar @ Mon Mar 15 13:20:08 EDT 2021
user.dir=C:\OPAL-RT\HYPERSIM\hypersim_2021.1.0\Windows
user.name=VictoriaBruny
hycore.hyarch=Windows

--------------------------------------------------------------------------------
Save table [Test\data\Test_seq.csv]
Save table [Test\data\Test.csv]
--------------------------------------------------------------------------------
Test [Test] done.
--------------------------------------------------------------------------------