Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Controlled I Source, 3-ph
- Sylvain Ménard
- Jean-Nicolas Brunet
Description
Controlled I Source, 3-ph
The controlled current sources, 3-ph represent a three-phase A.C. source with a series or parallel RLC impedance. In the network, these sources only generate the signal received on the control connectors. Hence, this process serves only to amplify or inject a signal in the network.
Current sources have parallel impedance only that can be series of parallel RLC elements.
Current sources inject current between buses without grounding.
Mask and Parameters
| Name | Description | Unit |
|---|---|---|
RLC connection type | Series (series R, L, C) or parallel (parallel R, L, C) | - |
R | Resistance value in ohms | ohms |
L | Inductance value in henry. | H |
C | Capacitor value in farad | F |
Ports, Inputs, Outputs and Signals Available for Monitoring
Ports
- The current source injects a current from one bus (port) to another (port), without grounding.
Inputs
- I input (current source): The current amplitude signal. three-phase signal
Outputs
- None
Sensors
- I(a, b, c)_label: Current signal (current source) (A).
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter